Bingo Plus

What will happen if the engine enters water (the consequences of the engine entering water are Bingo Plusserious and must be dealt with as soon as possible!) Engine water inlet is one of the common problems in car maintenance. When this happens, the driver should stop and deal with it immediately. If it is not dealt with in time, the inlet of water may cause great damage to the engine. Let's take a look at the consequences of water entering the engine. Consequences of water entering the engine 1. After the circuit system is damaged and the engine enters the water, the water may seep into the circuit system and cause serious damage. The circuit system is an important part of the vehicle, and its damage will cause the vehicle to fail to start or fail.In addition, an electrical short circuit may also cause the combustion of the welding lead, causing the vehicle to catch fire. Two. When water enters the engine, the water may seep into the cylinder. This will cause the car to catch fire, smoke and the vehicle to fail to drive normally. If this situation continues, it will seriously damage the cylinder wall and connecting rod bearings. Damaged cylinder walls and connecting rod bearings will increase engine wear and eventually cause the engine to be locked. 3. Engine damage When water enters the engine, water may enter the crankcase. Diesel and gasoline are essential lubricants for lubricating the engine. If water enters the crankcase, it will dilute the oil, causing serious damage to the engine and may cause engine locking. Four. The performance is seriously reduced. When the engine is flooded, the performance of the car will be seriously reduced. Problems such as difficulty in starting the vehicle, decreased acceleration performance, increased fuel consumption, and louder engine noise will all occur.How to deal with engine water? If you suspect that the engine has water, park the vehicle in a safe zone immediately and tow it back to the repair shop. Don't try to repair the car by yourself. Now, let's take a look at the operation required to repair the vehicle. 1. To remove the air filter, you first need to remove the air filter and check whether there is water entering the intake pipe. Do not turn off the engine at this time, because if water enters the cylinder, starting the car will cause more damage to the engine. If water enters the intake pipe, please remove the spark plug and use an electric heater to evaporate the water. Two. Clean the circuit with a clean cloth. Use a clean and dry cloth to clean the circuit and check all the parts connected to the circuit. 3. Check whether there is water in the crankcase. Remove the crankcase and oil sup to check whether there is water in it. If there is water, it needs to be thoroughly cleaned.All parts affected by water and lubricating oil need to be replaced. Four. Check the diluted coolant. If you find a diluted liquid in the coolant, it means that water has entered the engine. In this case, the seal, water pump, fan, water tank, water temperature meter and all pipelines need to be replaced. To sum up, water in the engine is a very serious problem, which may cause damage to the engine. If you suspect water entering the engine, please park your car in a safe zone immediately and tow it back to the garage for repair. If you have enough skills and experience, you can make a preliminary treatment of the car. However, the reason must be investigated to ensure that the engine is not further damaged. The best way is to regularly check the cooling system of the car, keep the water tank clean and use the correct coolant to avoid water entering the engine. Therefore, we suggest that you maintain the car.This can ensure that your car is in the best condition at all times and reduce the possibility of wasting time and money due to trailer maintenance.

Contact Us
Phone：020-83484628