DigiPlus fair value

List of contents of this article:

• 1, What does the engine cylinder burst mean?
• 2, What is the difference between bursting cylinder, knocking cylinder, pulling cylinder and flooding cylinder?
• 3、DigiPlus fair value' title='What's wrong with the car's cylinder bursting?'> What's the matter with the car's cylinder burst?
• 4、Car burst cylinder How to repair

What does the engine cylinder burst mean?

The slightest control error or disorder will lead to abnormal combustion, and "burst cylinder" is abnormal combustion.

The burst cylinder is caused by the excessive temperature of the engine, the expansion of the piston and stuck in the cylinder, resulting in the scrapping of the engine. When it is serious, the piston cannot move because of excessive pressure, it will spew thick flames.

The so-called engine cylinder burst is the phenomenon that the piston and the cylinder are stuck together, causing the combustion and expanding mixed air to blow up the cylinder wall or cylinder head. Generally, if the engine bursts, the engine will be scrapped. The engine cylinder can be repaired, but it is not recommended.

The so-called automobile engine cylinder burst refers to the piston stuck in the cylinder due to high temperature expansion, resulting in the scrapping of the engine. When the pressure is too high and the piston cannot move, it will spew out thick flames.

What is the difference between bursting cylinder, knocking cylinder, pulling cylinder and flooding cylinder?

Cylinder burst: "Dadada" car "cylinder burst" refers to a fault that the piston is stuck in the cylinder after heating and expanding due to excessive engine temperature. After the failure, the engine will be accompanied by a "da-da" sound. In severe cases, the cylinder will be under too much pressure because it is stuck by the piston, spewing out thick flames, which looks very scary.

Different properties: the pulling cylinder is that the inner wall of the cylinder is pulled into a very deep groove. When the piston and piston ring rub against the cylinder wall, they lose sealing, resulting in a decrease in the compressive pressure of the cylinder and the loss of power. Knocking on the cylinder is a phenomenon in which the metal knocking sound occurs when the pressure increase rate in the cylinder is too high.

The reason why the engine knocks on the cylinder. First, the gap between the piston and the cylinder wall is too large, resulting in the sound of the piston swinging and hitting the cylinder wall. Second, the sound is different from the former caused by poor lubrication, just like a small hammer knocking on a steel pipe, rigid, rigid, rigid sound.

Because the engine temperature is too high, the piston expands too much, eliminating the matching gap, resulting in pulling the cylinder. The reason why the car knocks on the cylinder: the gap between the piston and the cylinder block is too large. When the piston moves to the vertex, it is affected by the horizontal force of the inclined connecting rod, resulting in the left and right knocking of the cylinder. The lubricating oil film is not thick enough.

What's wrong with the bursting cylinder of the car?

The reason why the cylinder of the car bursts: First, design defects. In many cases, the phenomenon of cylinder bursting in a car is caused by car quality problems.There are defects in the design of the car, and the heat dissipation effect of the engine is not good, resulting in the temperature of the engine exceeding the highest temperature it can withstand, resulting in a burst of the engine cylinder. Second, insufficient lubrication.

The bursting cylinder is caused by excessive temperature and piston expansion. The bursting cylinder is when the car's tachometer enters the red light area. Because the temperature is too high, the piston expands and is stuck in the cylinder, causing the engine to be scrapped. When the situation is serious, the piston cannot move due to excessive pressure, resulting in the 4 wheels of the vehicle being locked and spewing out thick flames.

The reasons are as follows: the cylinder of the car bursts due to design defects. The general reason is the quality problem of the car. Defects in the design of the car cause the engine temperature to exceed the highest temperature that the engine can withstand, causing the engine cylinder to burst. Engine cylinder explosion caused by oil quality and speed.

Listen to what others say: There are four reasons for the bursting cylinder of the car: the heat dissipation effect of the engine is poor, so that the working temperature of the engine exceeds the temperature that the original design can withstand. The quality of the engine oil or the lack of lubrication caused by poor circulation. The adjustment of the intake and exhaust system and ignition time of the engine is inaccurate.

The so-called automobile engine cylinder burst refers to the piston stuck in the cylinder due to high temperature expansion, resulting in the scrapping of the engine. When the pressure is too high and the piston cannot move, it will spew out thick flames.

The reasons for the explosion of the engine cylinder are: design defects: the bursting cylinder of the car is mainly caused by the defects of the quality of the car and the design of the car, which causes the engine temperature to exceed the maximum temperature that the engine can withstand, resulting in the bursting of the engine cylinder.